LED lamps will be more popular than traditional lamps, and their sales in the market are also relatively high, and they are loved by many consumers. LED lamps are so recognized by the public because they have the following advantages.

The LED lamp is small in size. Because the very fine LED chip is encapsulated in a transparent epoxy resin, it is very very light and can save a lot of materials and space in production and application.

The working voltage of the LED lamp is generally only 2~3.6V, and the working current is only 0.02~0.03A. That is to say: it consumes no more than 0.1W and consumes more than 90% less electricity than an incandescent lamp with the same luminous efficiency, which is more energy-saving The lights are reduced by more than 70%. Therefore, only LED can be called a real energy-saving light source!

The LED chip is completely encapsulated in epoxy resin, which makes the small epoxy resin particles extremely difficult to break, and the entire lamp body has no loose parts; the chip inside is extremely difficult to break, and it is rarely caused by thermal effects. It can be volatilized and fused. These characteristics make LED lamps difficult to damage.

Under the proper current and voltage, the service life of the LED lamp can reach 100,000 hours, that is, theoretically, the life of the product can reach more than 10 years, which has a longer service life than other types of lamps.

Safe low voltage

LED lights to use low-voltage DC power (AC can be rectified to DC), and the power supply voltage is between 6~24V, which varies from product to product. In short, it uses a DC power supply that is safer than a high-voltage power supply and is especially suitable for homes and public places.

Because of its compactness, each unit LED chip is 3~5mm square or round, so it is more suitable for preparing devices with complex modeling processes. For example, it can be used in the manufacture of soft, bendable lamp tubes, lamp strips, and special-shaped lights.

In the past, the colors of lamps on the market were very single. To achieve the color purpose, one is to paint or cover the surface of the lamp, and the other is to fill the lamp with an inert gas to emit light, so the richness of the color is limited. LED lights are digitally controlled, and the light-emitting chip currently emits a variety of colors, including red, green, and blue. It is precise with these ternary colors that through system control, the colorfulness of the world can be restored.

LED is a more advanced cold light source. It does not radiate a lot of infrared and ultraviolet like incandescent lamps and fluorescent lamps. It is especially suitable for lighting cultural relics, jewelry, high-end cosmetics, and other valuables. There is almost no current heating effect like an incandescent lamp, and it will not be affected by thermal expansion and contraction. It will not make the bulb yellow, will not accelerate the aging of the lamp, and will not cause a greenhouse effect on the surrounding environment.

The protective effect of LED lamps on the environment is mainly manifested in three aspects:

(1) There is no harm from metallic mercury. LED lamps do not use high-hazard mercury like fluorescent lamps, and there will be no public hazards such as mercury ions and phosphors that may leak during the manufacturing process or after the bulb is broken.

(2) The epoxy resin used to manufacture LED is an organic polymer compound, which has good physical and chemical properties after curing, has high bonding strength to chips and metals, is hard and flexible, is stable to salt and alkali and most solvents, and is not easily damaged. It can be recycled and reused even after damage or aging, without pollution to the environment.

(3) The particle layout of LED lamps and display screens generally produces light scattered and rarely produces light pollution.

Compared with incandescent lamps, fluorescent lamps, and LED lamps, the purchase price is higher. However, due to the extremely low energy consumption of LED, a large amount of electricity can be saved in the long term, and the investment in lamp replacement can be saved, so the comprehensive use cost is more cost-effective.

Foresight designs and manufactures various types and specifications of LED lamps to meet the different needs of users. If you want to get further related services, you can send your needs to us, and we will give you a satisfactory answer in time.

As a professional manufacturer of LED products, we have become a leader in the industry with our excellent R&D technology and leading manufacturing technology. We are equipped with a professional quality inspection system, which can carry out comprehensive control from product design to export. We also provide thoughtful one-stop service, if you are interested in our LED lights, please contact us immediately!